Your water heater is one pretty used and more appliances in your home, and consumes a large involving your energy dollars each month. And experts say regular care and maintenance is essential to protecting your investment and saving with regards to your home heating and costs.
Regular flushing of the water heater is among the single most important step you consider to prolong its service life this particular save energy. In a period of time, sediments strengthen in the bottom of your water heater. These sediments act as a barrier between the flame and the tank, thereby making your heater burn longer and hotter. This is not only destructive to the tank, but highly inefficient and will significantly raise your heating costs.
In most areas of the country, the normal water heater lasts 3-5 years. Regularly flushing your water heater can double lifestyle of your hot water heater from 3-5 to 7-10 years. To provide a source costs of replacement running from $700 to over $1200 in some cases, getting the most from your heater is in today’s affordable. In addition, regular flushing makes your hot water heater run more efficiently and can cut heating costs in half. Depending on the volume of warm water your home uses, that can mean a savings of $20 to over $50 a fair amount of time.
To drain your water heater, first you should set the thermostat to pilot (if it can be a gas water heater) or turn the circuit breaker off (if it is actually electric heater). Failure to do so could result in overheating and severe damage to water heater. Next, close the water supply valve located over the water inlet line going into your water heater. You may then connect a hose to the drain valve located in the bottoom of the heater tank. Open the drain and allow it working out until all of your water has emptied from the air conditioner. Then close the drain. Open the water supply valve and refill the heater tank. You should also open a hot water faucet somewhere inside the house and stand there and watch it run for several minutes until the flows out smoothly. This will allow air to vent because of the heater and the hot water lines. Finally, you can turn the thermostat to its regular setting (for a gas heater), or turn the circuit breakers back on (for an electric heater).
Besides regularly flushing your water heater, plumbing experts also advise adding a water treatment system home to filter or condition the water so is actually always less corrosive to your plumbing system, particularly in areas which have hard water. For more ways to care for and protect your home plumbing system, contact a licensed, professional plumbing contractor in region to discuss options and merchandise to work for you.
Abacus Plumbing, Air Conditioning & Electrical
The Woodlands, TX
(281) 528-1610